Contents
Our quick picksHow we chose1. MaxWorks Blue Small Parts Bin2. Draper Blue Van Drawer Unit3. Einhell Tool Bags And Box4. Customisable Makpac And Tstak Storage5. Stalwart Small Parts Bin6. VonHaus Tool Bags And Box7. 90L Black Small Parts Bin8. VonHaus Louvre Panels And Peg BoardSealed compartments matter mostRemovable inner boxesFitting cases to your rackingSmall parts binsFAQsScrews, wall plugs, fuses, compression fittings and crimps cause more lost time than almost anything else in a van. Tip one bag over on a roundabout and you will be picking brass olives off the floor for the rest of the week. A good organiser case keeps every part in its own compartment and every lid shut. Without one, a box of fixings tips over on the first roundabout and you lose an hour sorting it.
This guide looks at parts organiser cases and small parts bins that suit van racking. We cover lid catches, removable inner boxes, stacking systems and labelling, so you can pick cases that keep up with how you work. We also look at small parts bins for the consumables you grab several times a day, and at how many cases a typical van really needs.
Our picks at a glance
- MaxWorks Blue Small Parts Bin: best overall, £23.38
- Draper Blue Van Drawer Unit: best budget case, £14.39
- Einhell Tool Bags And Box: best with removable boxes, £19.98
- Customisable Makpac And Tstak Storage: best stackable system, £14.99
- Stalwart Small Parts Bin: best for electricians, £18.16
- VonHaus Tool Bags And Box: best for plumbing fittings, £15.99
- 90L Black Small Parts Bin: best small parts bins, £29.95
- VonHaus Louvre Panels And Peg Board: best large organiser, £24.99
How we chose
We compared cases from our collections on how well they keep parts separated in a moving vehicle. Lids that seal tightly over each compartment ranked above open trays. Removable inner boxes scored well, as you can carry just the box you need into a job. We also looked at catches, hinges, the case footprint relative to common shelf depths, and whether a case belongs to a stacking or click-together system.

1.MaxWorks Blue Small Parts Bin
MaxWorks Blue Small Parts Bin is our pick for overall. Specs worth noting: colour Blue. It averages 4.5 stars from 4,643 reviews. £23.38, so you pay a bit more for the spec. You can see the full specs and photos on the MaxWorks Blue Small Parts Bin page.
Screws
Nails
Compare it with the rest of our small parts bins.

2.Draper Blue Van Drawer Unit
This is the one we would point most people to for budget case. Specs worth noting: material Plastic, colour Blue. 2,034 buyers rate it 4.6 out of 5. £14.39, one of the cheaper options here. Have a look at the Draper Blue Van Drawer Unit for the full spec.
Wall Mountable
12014
If it is not quite right, we stock plenty more small parts bins.

3.Einhell Tool Bags And Box
This is the one we would point most people to for with removable boxes. It averages 4.7 stars from 3,172 reviews. £19.98, one of the cheaper options here. Have a look at the Einhell Tool Bags And Box for the full spec.
Stackable
Compare it with the rest of our storage cases under 50.

4.Customisable Makpac And Tstak Storage
This is the one we would point most people to for stackable system. It averages 4.5 stars from 3,392 reviews. £14.99, one of the cheaper options here. Have a look at the Customisable Makpac And Tstak Storage for the full spec.
And ideal for secure tool storage
There are other options in our storage cases under 50 range too.

5.Stalwart Small Parts Bin
This is the one we would point most people to for for electricians. It averages 4.5 stars from 3,271 reviews. £18.16, one of the cheaper options here. Have a look at the Stalwart Small Parts Bin for the full spec.
Bolts
Nuts
There are other options in our small parts bins range too.

6.VonHaus Tool Bags And Box
This is the one we would point most people to for for plumbing fittings. Specs worth noting: material Plastic. 2,638 buyers rate it 4.5 out of 5. £15.99, one of the cheaper options here. Have a look at the VonHaus Tool Bags And Box for the full spec.
Ideal for D
If it is not quite right, we stock plenty more parts organiser cases.

7.90L Black Small Parts Bin
This is the one we would point most people to for small parts bins. Specs worth noting: material Plastic, colour Black. It averages 4.6 stars from 1,475 reviews. £29.95, so you pay a bit more for the spec. Have a look at the 90L Black Small Parts Bin for the full spec.
Plastic Laundry Basket
Black&Silver
There are other options in our small parts bins range too.

8.VonHaus Louvre Panels And Peg Board
This is the one we would point most people to for large organiser. 1,668 buyers rate it 4.3 out of 5. £24.99, so you pay a bit more for the spec. Have a look at the VonHaus Louvre Panels And Peg Board for the full spec.
DIY Garage Storage Wall Mount System with Rack and Bin Accessories
Tool
Compare it with the rest of our small parts bins.
Prefer to browse everything? Our full ranges of parts organiser cases, small parts bins and storage cases under 50 have more sizes, finishes and price points than we could fit here.
Sealed compartments matter most
The single most useful feature is a lid that presses down on every compartment, so parts cannot jump between them when the case is shaken. Cheap organisers with a gap above the dividers let small screws wander. Look for lids with foam or tight-fitting ridges. Press the lid down and give the case a shake in the shop if you can. If you hear parts moving between compartments, keep looking.
Check the catches too. Metal catches tend to outlast plastic clips, and two catches hold the lid more evenly than one. A case dropped on a site floor should stay shut. Hinges are another weak spot. Look for a long piano hinge or several moulded hinges along the back edge rather than two thin pins that can snap off when the lid is forced back. Thin plastic hinge pins tend to snap, so look for metal pins or thick moulded hinges.
Removable inner boxes
Cases with lift-out inner boxes let you rearrange the layout and carry only what you need. You can buy spare inner boxes, keep one pre-loaded for a particular job, and swap it in. Inner boxes are also handy for job packs. A plumber can keep one box loaded for a radiator swap and another for a tap change, then grab the right one without thinking. Spare inner boxes are cheap, so buy a few extra for new jobs and odd parts.
Make sure the inner boxes have their own lids, or that the main lid seals them. Some systems use standard box sizes, so you can mix boxes between cases from the same range. Check the price of spare inner boxes before committing to a range, because buying a few extras is common. Some ranges sell them in packs, which works out cheaper than buying single boxes as you need them.
Fitting cases to your racking
Measure your shelf depth before you buy cases. A case that overhangs a shelf lip will rattle and can fall. Some racking is designed around a particular case system, with rails that slide cases in and lock them. Weigh up how many cases you need before deciding on shelf layout. Six cases on a shelf look neat, but if they stack three high you will be lifting two off every time you need the bottom one.
Labelling is worth doing from day one. A label on the end of each case tells you what is inside without pulling it out, which matters when cases are stacked on a shelf. Colour coding works well too. Use one colour of label for electrical parts, another for plumbing and another for fixings, so you can spot the right case from the door. Keep a spare sheet of labels in the glovebox for when stock changes.
Small parts bins
Open-fronted bins hung on a louvre panel or set on a shelf give quick access to the parts you use most. They suit high-turnover items like screws and wall plugs. Panels that take hanging bins make good use of the space on a bulkhead or the back of a door. Keep the most used parts there, and refill from bulk stock at the end of the week rather than mid-job.
Bins are less secure than sealed cases when driving, so place them on shelves with lips or on panels that hold them firmly. Many people use bins for daily consumables and sealed cases for everything else. Bins with a lip at the front hold items better than open trays. Choose a size that suits the parts. Large bins for wall plugs, smaller ones for fuses and crimps, so you are not digging through a deep tub for one small piece.
Frequently asked questions
What size organiser case fits van shelving?
Measure your shelf depth and height, then compare with the case dimensions. Many cases are made to suit common racking depths, but check before buying several of the same case. Write the shelf depth and height down before you buy, as cases vary more than you might expect.
Are parts organisers waterproof?
Some have seals around the lid, but most are only splash resistant. If you keep cases in an open pickup or on site, look for cases listed with a seal or IP rating. Fully waterproof cases are less common, so check the listing for a seal if this matters.
Can I mix organisers from different brands?
You can, but stacking and click-together systems usually only work within one range. If you want cases to lock together, stay with one system. Some brands do share sizes, so check listings. If the listing is not clear, ask the seller which inner boxes fit.
How do I stop small parts mixing?
Choose cases whose lid presses down on every compartment, and avoid overfilling compartments so the lid can close flush. Running a strip of tape inside the lid also helps take up any small gap on older cases.
Are small parts bins good for vans?
They work well for frequently used items when mounted on a panel or a lipped shelf. For loose items you rarely use, a sealed case is safer while driving. A rubber shelf liner stops cases sliding about when you brake.